Notice for the use
1.The input AC voltage 220V
2.Our company’s lithium battery is equipped with overcurrent, overvoltage automatic protection function, must be matched with a lithium battery charger of our company,  the battery’s positive and negative pole is forbidden contacting with the metal which may cause short circuit.
3.When charging, plug the battery firstly, then plug the AC power plug. The end of charging, please cut off the AC power, then pull the battery. Note that,turn on the battery switch when charging , turn off the battery switch after charging.Charging lithium battery in the first three times, should charge over 12 hours, to ensure the  life of lithium battery. Note: the battery red dot is open on one side.
4.The red light does not shine, input and output AC power supply is not normal, or charger failure.
5.The red light, normal charging, charging two stage timing regulator.
6.The green light shines, the charging is completed. In addition, when start charging, there may be a period of time the red light does not shine, this is the battery precharge, finally, the red light will shine, if the red light does not light may have problem. 
Charger should pay attention to moisture, shock, heat ventilation, away from flammable and explosive goods. There are high voltage inside, non professional personnel please do not open it.
7.If the long-term storage of lithium battery , keep in the 50% discharge state. The battery should be stored in low temperature, dry environment, away from heat, also do not put in direct sunlight.